Fix Apple TV light blinking issue when using remote

August 25, 2021

What’s worse than finding your Apple TV light blinking continuously and not returning to normal even after multiple attempts to fix it. It’s not unusual to experience this issue as every new technology we embrace is known to have some bugs bundled up with it.

Apple TV Light Blinking Issue

How to fix Apple TV light blinking?

There can be a multitude of reasons why your Apple TV light blinking doesn’t stop. However, many users complain, the Apple tv blinking light issue appears especially when there’s some sort of interference with Apple TV firmware update. So, just when they try to update Apple TV, the flashlight begins to trouble them.

  1. Unplug the HDMI cable and plug it back in.
  2. Change the resolution
  3. Try using a different HDMI.
  4. Unplug your TV and Apple TV from power and then plug them back in.
  5. Reset Apple TV.

What does flashing status light on Apple TV indicate?

Apple TV Status Light
Apple TV Status Light

When the Apple TV is operating normally, it’s light glows bright.

Alternatively, when you’ve put the Apple TV in standby mode or powered it off, the light does not glow.

Similarly, when the Apple TV is starting up, the status light flashes slowly and upon receiving an input via ‘remote’, the status light flashes just once.

Lastly, when a software update is in progress, the Apple TV light flashes rapidly. So, if there’s any interference with Apple TV firmware update, you’ll still see the Apple TV light blinking.

How do I fix my Apple TV from blinking?

If your Apple TV doesn’t turn on, show video or has a flashing status light, here’s what you can try and see if it works!

1] Unplug the HDMI cable and plug them back in

When your Apple TV doesn’t turn on or show video or has a flashing status light, try unplugging both ends of the HDMI cable, then firmly plug them back in. If this method doesn’t work, change the resolution.


2] Change the resolution

For this, switch to a different HDMI port on your television, starting with HDMI 1 or Input.

You should see the Apple logo followed by a black screen.

Siri Remote Apple TV
Siri Remote Apple TV

At this point, hold the Menu and Volume Down button for 5 seconds, then release. Your Apple TV will switch to a new resolution every 20 seconds.

Select OK to choose a resolution or Cancel to quit.

3] Try using a different HDMI

Apple TV HDMI Port
Apple TV HDMI Port

Sometimes, using a receiver or an HDMI switch can lead to Apple TV light blinking rapidly. To fix this, connect your Apple TV directly to the television instead of using the receiver or HDMI switch.

When the Apple TV Home screen is visible to you, connect your receiver or HDMI switch one at a time. After each additional device is connected, check if you are still able to see the Home screen on your television. If yes, the problem is fixed!

4] Unplug your TV and Apple TV from power, then plug both back in

This is one of the easiest ways to fix the Apple TV blinking light issue. Simply unplug your TV and Apple TV device from power, then plug both back in. If it does not yield the desired results, use the Reset method as your last resort.

5] Reset Apple TV

To reset your Apple TV 4K or Apple TV HD, choose Settings from Apple TV Home Screen.

Reset Apple TV
Reset Apple TV

Look for the System tab and scroll down to Reset option. Choose a reset option -

  • Reset: This option offers a quick way to return your Apple TV to factory settings. There’s no need to have an Internet connection for it.
  • Reset and Update: This option restores your Apple TV to its factory settings and installs software updates. It requires an active Internet connection.

While using any one of the above reset options, keep your Apple TV plugged into power until the process is completed.

Hope it makes sense!


About the Author

Hemant Saxena
(411 Articles Published)

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Post


Read More